Autel MaxiCOM MK808BT PRO OBD2 Diagnostic Tool IMMO Key Scanner Upgraded Ver. Of MK808BT/MK808/MX808 Scanner

Autel MaxiCOM MK808BT PRO

 Autel MaxiCOM MK808BT PRO automotive diagnostic tool , as an advanced version of Autel MX808/MK808BT, based on Android OS and 7.0 inch touchscreen, has the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market. As a pro-grade automotive diagnostic scanner, MK808BT PRO scan tool also provides you with superior special functions, including Oil Reset, EPB(Electronic Parking Brake), SAS (Steering Angle Sensor), BMS (Battery Management System), ABS Brake Bleed and DPF (Diesel Particulate Filter) Regeneration.

MaxiCOM MK808BT PRO Top 10 Highlights:

1.  Android 11.0!
2. No IP Restrictions
3. All Systems Diagnostic
4. Wide Vehicle Coverage
5. Support 24 Kinds of Languages
6. One Click Wi-Fi Update
7. 37+ Service & Maintenance Functions
8. Data Log & Remote Help
9. 2024 Upgraded Of MK808BT/MK808/MK808S/MX808
10. Stable BT Connection, working range up to 30 feet(10m)

Autel MK808BT PRO 2024 New Added Functions:

BMW V4.00 version adds the following functions:

1. Optimizes basic functions, supporting models up to July 2021.
2. Adds 7 hot special functions: Transport Mode, HV Battery, ACC, A/C, Rain/Light Sensor, EGR, and FRM Reset.
   
3. Adds basic functions and special functions for models with 4 types of chassis including G22 and G82.

Comparison of MK808BT/MK808S/MK808BT PRO:

MaxiCOM MK808BT PRO Features:

• Bi-Directional Control

• 37+ Advanced Hot Services

• OE-Level All Systems Diagnostics

• OBDII Full Functions

This option presents a quick way to check for DTCs, isolate the cause of an illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emissions-related. The OBD direct access option is also used for testing OBD II/EOBD compliant vehicles that are not included in the Diagnostics database.

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs).
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
4. Live Data: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
5. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
6. O2 Sensor Monitor: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
8. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

• Bluetooth Diagnostics

• Advanced Hardware

1. Extraordinarily powerful Cortex-A55 processor (1.8 GHz) processor
2. 7-inch LCD capacitive touchscreen with 1024 x 600 resolution display
3. Internal reliable 64 GB On-board Memory for better performance
4. Unique ergonomic design with rubberized outer protection and a rugged internal housing
5. Android 11 Operating System for fast boot-up and multitasking

• 150+ Brand Worldwide Vehicles

The Autel MaxiCOM MK808 PRO works well with: Acura, Audi, Benz, Bentley, BMW, Bugatti, Chevrolet, Chrysler, Corolla Gm, Holden, Ford, Honda, Hyundai, Infiniti, Kia, Land Rover, Isuzu, Jaguar, Lexus, Maybach, Mitsubishi, Nissan, Mazda, Mini, Opel, Porsche, Saab, Scion, Smart, Seat, Skoda, Sprinter, Subaru, Vauxhall, Volvo, Suzuki, Toyota, and Volkswagen vehicles, etc.